SYSTem:COMMunicate:LAN:DNS[{1|2}] "<address>"
SYSTem:COMMunicate:LAN:DNS[{1|2}]? [{CURRent|STATic}]
Assigns static IP addresses of Domain Name System (DNS) servers. A primary and a secondary server
address may be assigned. If DHCP is available and enabled, DHCP will auto-assign these server
addresses. These auto-assigned server addresses take precedence over the static addresses assigned
with this command. Contact your LAN administrator for details.
If you change this setting, you must send
activate the new setting.
Parameter
nnn.nnn.nnn.nnn
Command: "
Query: {CURRent|STATic}. Default: CURRent.
Set a static primary DNS address:
SYST:COMM:LAN:DNS "198.105.232.4"
SYST:COMM:LAN:UPD
CURRent: returns address currently being used by the instrument.
l
STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or
l
unavailable.
SYSTem:SECurity:IMMediate
l
On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l
The assigned DNS server addresses are used if DHCP is disabled or unavailable. Otherwise, the DNS
l
server addresses are auto-assigned by DHCP.
The DNS server addresses are stored in nonvolatile memory. They do not change when power has
l
been off, after a Factory Reset (*RST) or after an Instrument Preset (SYSTem:PRESet).
SYSTem:COMMunicate:LAN:DOMain?
Returns the domain name assigned to the instrument.
Parameter
(none)
Return the domain name being used by the instrument:
SYST:COMM:LAN:DOM?
If Dynamic Domain Name System (DNS) is available on your network and your instrument uses DHCP,
l
the domain name is assigned by the Dynamic DNS service at power-on.
A null string ("") indicates that no domain name is assigned.
l
On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l
Keysight Truevolt Series Operating and Service Guide
"198.105.232.4"
". Default: "0.0.0.0".
sets this parameter to its default value.
Typical Return
"example.com"
SCPI Programming Reference
SYSTem:COMMunicate:LAN:UPDate
Typical Return
to
409