Keysight Truevolt Serie Mode D'emploi page 389

SCPI Programming Reference
STATus:OPERation[:EVENt]?
Returns the sum of the bits in the event register for the
register is a read-only register that latches events from the condition register. While an event bit is set,
subsequent events corresponding to that bit are ignored. The register bits are cleared when you read the
register.
Parameter Typical Return
(none) +512
Read the event register (bit 9 is set):
STAT:OPER:EVEN?
Once a bit is set, it remains set until cleared by reading the event register or by sending
l
status).
STATus:PRESet
Clears Questionable Data
Parameter Typical Return
(none) (none)
Clear enable register bits:
STAT:PRES
STATus:QUEStionable:CONDition?
Returns the sum of the bits in the condition register for the
register is read-only; bits are not cleared when read.
A condition register continuously monitors the state of the instrument. Condition register bits are updated
in real time; they are neither latched nor buffered.
Parameter Typical Return
(none) +4096
Read the condition register (bit 12 is set):
STAT:QUES:COND?
The condition register bits reflect the current condition. If a condition goes away, the corresponding
l
bit is cleared in the condition register.
390
enable register and Standard Operation
Standard Operation Register
enable register.
Questionable Data Register
Keysight Truevolt Series Operating and Service Guide
group. An event
*CLS (clear
group. This