Salicru SLC CUBE 3+ Mode D'emploi page 96

(X32)
(X50)
(PT )
2
(X31)
(X31 )
USB
(X36 )
i
(X36 )
o
Fig. 21. Connection of communications for models up to 60 kVA
(LV) / 120 kVA (HV).
(X36 )
o
(X36 )
i
(X31 )
USB
(X31)
(PT )
2
(X50)
(X32)
Fig. 22. Connection of communications for models higher than 60
kVA (LV) / 120 kVA (HV).
4.1.2 Legend corresponding to the equipment views.
Protection and manoeuvring parts (Q*) in the UPS cabinet:
(Q1a) Input circuit breaker or switch according to the equipment
power rate.
(Q2) Output switch.
(Q3) Battery fuse holder switch with 3 fuses in models up to 20
kVA (LV) / 40 kVA (HV) or switch in models with higher power
rate and/or B1 versions.
(F3) Battery fuse holder switch with 3 fuses. Up to 20 kVA (LV) /
40 kVA (HV) models with extended back up time, where the
batteries are fitted in or ready to be fitted in part inside the own
UPS cabinet.
96
(1): (a) (b)
(2)
Fig. 23. Alphanumerical control panel (see section 7).
Fig. 24. Touchscreen control panel (see EL064*01 user's manual).
(Q4a) Static bypass switch, two or three poles depending on
the mains typology (-B version only).
(Q5) Manual bypass switch.
Protection and manoeuvring parts(Q*) in the battery cabinet:
(Q8) Battery fuse holder switch of 3 fuses, for models up to 60
kVA (LV) / 120 kVA (HV).
Battery switch, in models higher than 60 kVA (LV) / 120 kVA
(HV). Also there are 3 fuses (F8) with no switch function,
located inside the cabinet.
Connection parts (X*):
(X1) Terminal of input phase R.
(X2) Terminal of input phase S.
(X3) Terminal of input phase T.
(c) (d) (e)
(3)
USER MANUAL