Stryker 6000-801-000 Mode D'emploi page 15

3. Attach the Precision Targeting Arm
directly to the skull clamp or by
attaching it to the Arm Connector
Component.
4. Tighten the starburst knob of the
Precision Targeting Arm.
Right side of Arm Connector Compo-
nent is preferred location for better
maneuverability of Precision Tar-
geting Arm.
5. Lock the central knob of the
Precision Targeting Arm.
If the central knob has been fully
loosened it may require a little
force to be turned in the clockwise
direction.
.
The other starburst of the Arm Connector Component may be used for
attaching other ancillary components such as image guided surgery accessories.
Stryker
Figure 9: Attach the Precision Targeting Arm to the
Arm Connector Component.
Figure 10: Tighten the starburst knob of the
Precision Targeting Arm.
Figure 11 Lock the central knob of the
Precision Targeting Arm.
Preparation for use
11