Stryker 6000-801-000 Mode D'emploi page 8

Safety information
2 Safety information
2.1 Safety directives
WARNING
Before use
Modifications
General
Information
4
• Before each use, check the product for loose compo-
nents, damage, malfunction, and bent or deformed
parts. Do not use if these conditions exist. Failure to
comply may lead to patient or medical staff injury. If
service is required, contact your Stryker sales
representative.
• Prior to surgery, the instrument should be checked with
the guidance system to ensure they are functioning
properly.
• Do not modify this equipment without authorization of
the manufacturer.
• Read and understand this information, file it in your
maintenance records. Familiarization with the guidance
system before its use is important. Refer to the instruc-
tions for use of the guidance system. Only trained
personnel are to use this system.
• The instrument must only be used in accordance with
the instructions for use contained in this manual by
authorized persons who have been fully trained in their
safe and effective use. The failure to follow these
instructions will void your warranty.
• If the color coating on the Linear Adjustment knobs,
Rotational Adjustment knobs and Locking knobs are
found to be partially or fully chipped off, contact your
Stryker sales representative immediately.
• The health care provider performing any procedure is
responsible for determining the appropriateness of the
instrument and the specific technique for each patient.
Stryker, as a manufacturer, does not recommend a
specific surgical procedure.
Stryker