Preparation for use
4
Preparation for use
4.1 Arrow alignment of the Precision Targeting Guide
9 Prior to setting up the Precision Targeting System adjust the knobs so that the
marked arrows in Figure 2 and 3 match.
1. Set all locking knobs to open.
2. Locate the adjusting knobs.
3. Adjust the linear adjustment knobs
so that the marked arrows in
Figure 2 match. The nominal
position of the arm is achieved by
aligning the arrow heads.
4. Adjust the rotational adjustment
knobs so that the marked arrows in
Figure 3 match. The nominal posi-
tion of the arm is achieved by align-
ing the arrow heads.
8
Set to open.
Figure 1: Location of the adjusting knobs.
Figure 2: Adjusting the wheel for arrow alignment.
Figure 3: Adjusting the wheel for arrow alignment.
Stryker