Lifting Device Installation (Optional) - SICE S 200 Manuel D'instructions

6. Check that device is operating correctly as follows:
- hold the device with both hands, direct it towards the ground and press the button on
the device handle: NO air must be released.
- position the jet inflation device on the upper edge of a rim in order to push the valve
located on the end of the nozzle against the rim itself and press the button on the
device handle: a powerful jet of air must be released.
The jet inflation device must be held firmly with both hands. NEVER direct it
towards people or property.

1.5.5. Lifting device installation (optional)

1. Open the left side panel of the tyre changer.
2. Remove the lock on the left side panel of the machine and mount the pedal and the
protection using the included M8 screws.
3. After removing the cap, connect the pedal to the supply by connecting the T6 hose to
the multiple distributor inside the machine, using one of the free outputs.
104
WARNING
Manuale d'uso S 200