SICE S 200 Manuel D'instructions page 101

6. Refit the cylinder holder arm and the shims.
7. Insert the pin.
8. Use medium strength Loctite 243 and tighten SCREW 12 and washer with wrench 19.
Note: If necessary, use wrench 30 to hold the pin still.
9. Connect the Ø 6 supply hose to the quick coupling already present on the bead
pressing tool.
10. Fit the return spring of the bead presser arm as shown below.
11. Place the bead presser in the rest position..
Manuale d'uso S 200 101