SICE S 200 Manuel D'instructions page 126

care to centre the movable centring pin, placed radially on the turntable, in one of the
fixing bolt holes.
If the wheel weighs more than 10 kg, with a lifting frequency of more than 20
wheels/hour, it is recommended to use a lifting device (optional).
1. Fit the clamping device into the central hole of the wheel (A).
2. Turn the device for correct engagement with the turntable (B).
3. Move the centring cone manually into position on the rim by moving the retainers 1 (C).
4. Tighten the clamping device by turning the handles 2 clockwise (D).
126
CAUTION
A
C
B
D
Manuale d'uso S 200