Mount A Standard Tyre On A Rim As Follows - SICE S 200 Manuel D'instructions

Mount a standard tyre on a rim as follows:

Lubricate both the tyre beads, internally and externally, with the supplied assembly
paste.
Position tyre on top of the rim and tilt the tyre forward. Move the mounting / demounting
head into "working" position by pressing the pole rotation pedal
Rotate the assembly clockwise until the lower bead drops into the rim central channel.
When mounting the top bead, it is important to get the correct positioning of the
tyre on the mounting / demounting head.
MOUNTING HEAD
CORRECTLY PLACED
Place the tyre with its back side on the mounting/demounting head
136
CAUTION
MOUNTING HEAD
INCORRECTLY PLACED
Manuale d'uso S 200
.