SICE S 200 Manuel D'instructions page 142

Tilt the nozzle according to the rim shape, trying to optimise the angle for an easy
injection of air inside the tyre.
Start injecting air using the inflation pedal and immediately after press the button on
the inflation device handle; in this way, a powerful air jet will seal the tyre at the rim
edges.
Do not stand over tyre during inflation.
The device must be firmly held with both hands, since the air jet emission produces
a strong recoil.
The air jet develops a series of internal forces inside the tyre: these allow bead insertion.
When the safety valve does not touch the rim and is not pressed against it, the device
cannot be used; despite the presence of the safety valve, NEVER direct the nozzle
towards persons or objects.
To increase the effectiveness of the inflation jets, always liberally lubricate beads
and raise the lower bead while activating inflation jets.
Press down the pedal to inflate the tyre. Frequently stop to check the inflation pressure
on the gauge.
142
CAUTION
CAUTION
CAUTION
CAUTION
Manuale d'uso S 200