Transport, Storage And Handling - SICE S 200 Manuel D'instructions

23. Clamp the rim on the turntable during inflation.
24. Disconnecting the pneumatic supply, both due to non-use
or to maintenance of the machine or the pneumatic system of
the workshop, can leave pneumatic actuators under pressure.
Discharge the machine pneumatic system using the controls
on the actuators.

1.4 TRANSPORT, STORAGE AND HANDLING

Machine transport conditions
The tyre changer must be transported in its original packing and kept in the position
indicated on the packing.
- Packing dimensions:
• width
• depth
• height 2015 mm
- Weight with packing 480 kg
Ambient conditions for machine transport and storage
Temperature: -25° ÷ +55°C.
Do not stack other goods on top of the packing to avoid damaging it.
Handling
To move the packing insert the forks of a fork-lift
truck into the dedicated slots at the base of the
packing itself (pallet). To move the machine, refer to
the chapter LIFTING/ HANDLING.
Manuale d'uso S 200
1160 mm
1300mm
WARNING
95