SICE S 200 Manuel D'instructions page 113

Approximate Air Consumption:
Clamping System Rotating Speed:
Max. Tyre Diameter:
Max Bead Breaking Roller Opening
Width:
Admitted Diameter Range:
Weight
Weight of the electrical/electronic
components
Noise level when operating
The noise values indicated are emission levels and do not necessarily represent
safe operating levels. Although emission levels and exposure levels are connected,
this relation cannot be used as a safe parameter to determine whether or not further
precautions are necessary. The noise level to which the operator is exposed to depends
on a number of factors, such as duration of exposure, characteristics of the workplace,
other sources of noise etc. Permissible noise exposure levels may also vary from country
to country. In all cases, this information will enable machine users to better assess the
danger and risks involved.
Explanations of icons
These icons may appear on the equipment.
Alternating current.
Earth ground terminal.
Protective conductor terminal.
Electrocution hazard.
Manuale d'uso S 200
a 8 bar = 6 l/s • 0.2118 Ft3/s • 12.70 CFM (ft3/min)
a 10 bar = 7.76 l/s • 0.2471 Ft3/s • 14.82 CFM (ft3/min)
Mechanical System
Clockwise: 7 rpm and 17 rpm
Anticlockwise: 7 rpm
45 in
15 in
12-30 in
450 kg
10.2 kg
70 db(A)
113