Installation - SICE S 62 E Manuel D'instructions

CAUTION
Always unplug the power supply cable from the socket before moving the machine.
CAUTION
Never apply force to the wheel spin shaft when moving the machine.
CAUTION
Take the utmost care when unpacking, assembling, lifting and setting up the machine
as indicated below.
Failure to observe these instructions can damage the machine and compromise the
operator's safety.
Remove the original packaging materials after positioning them as indicated on the packaging
and keep them intact so the machine can be safely shipped at a later date if necessary.
CAUTION
Choose the place of installation in compliance with local regulations on occupational safety.
In particular, the machine must only be installed and used in protected environments
where there is no risk of anything dripping onto it.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in the
place of use should be at least 300 lux.
The floor must be strong enough to support a load equal to the weight of the equipment
plus the maximum load allowed. The support base on the floor and the envisaged fixing
S 62 E Operator's manual
2

INSTALLATION

3
71