Keysight Technologies N6700C Serie Guide D'utilisation page 82

Press the Help key at the lowest menu level to display help information about the function con-
l
trols.
For a map of the front panel menu commands, refer to
example shows you how to navigate the front panel command menu to program the over-voltage
protection function.
Menu example - setting over-voltage protection
Keysight N6700C Series User's Guide
Press Menu to access the front panel command menu. The first line identifies the
output channel that is being controlled followed by the menu path. Since the top
level is displayed, the path is empty.
The second line indicates the commands that are available at the present menu
level. In this case, the top-level menu commands are shown, with the Output
command highlighted.
The third line indicates which commands are available under the Output
command. Selecting the highlighted command accesses this lower level.
Press the right navigation u key to traverse the menu until the Protect command
is highlighted. Press Select to select the Protect command.
The menu path now lets you select from the available Protect commands on the
second line. The OVP command is highlighted. The third line has a brief description
of the OVP command. Press Select to select the OVP command.
Front Panel Menu Reference. The following
3 Getting Started
81