Keysight Technologies N6700C Serie Guide D'utilisation page 80

Set the Output Voltage
Method 1 – Use the Navigation and Arrow Keys
Navigation keys
ÇÈ
Arrow keys
Method 2 - Use the Voltage key to enter a value
Press Voltage to select the voltage entry field. In the display below, channel 1's
voltage setting is selected. Enter the desired setting using the numeric keypad.
Then press Enter.
If you make a mistake, either use the Å backspace key to delete the number, press
Back to back out of the menu, or press Meter to return to meter mode.
Set the Output Current
Method 1 – Use the Navigation and Arrow Keys
Navigation keys
Keysight N6700C Series User's Guide
Use the left and right navigation keys to navigate to the setting that you wish to
change. In the display below, channel 1's voltage setting is selected. Enter a value
using the numeric keypad. Then press Enter.
You can also use the numeric arrow keys to adjust the value up or down, and
switch between + and − limits on Model N6784A. When the output is on and the
unit is operating in CV mode, the output voltage changes immediately. Otherwise,
the value will become effective when the output is turned on.
Use the left and right navigation keys to navigate to the setting that you wish to
change. In the display below, channel 1's current setting is selected. Enter a value
using the numeric keypad. Then press Enter.
3 Getting Started
79