Keysight Technologies N6700C Serie Guide D'utilisation page 37

1 Quick Reference
:RESistance
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:STATe 0|OFF|1|ON, (@chanlist)
:SLEW
[:POSitive]
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
:COUPle 0|OFF|1|ON, (@chanlist)
:NEGative
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
STATus
:OPERation
[:EVENt]? (@chanlist)
:CONDition? (@chanlist)
:ENABle <value>, (@chanlist)
:NTRansiton <value>, (@chanlist)
:PTRansiton <value>, (@chanlist)
:PRESet
:QUEStionable
[:EVENt]? (@chanlist)
:CONDition? (@chanlist)
:ENABle <value>, (@chanlist)
:NTRansiton <value>, (@chanlist)
:PTRansiton <value>, (@chanlist)
SYSTem
:CHANnel
[:COUNt]?
:MODel? (@chanlist)
:OPTion? (@chanlist)
:SERial? (@chanlist)
:COMMunicate
:LAN|TCPip:CONTrol?
:RLSTate LOCal|REMote|RWLock
:ERRor?
:GROup?
:CATalog?
:DEFine (@chanlist)
36
Sets the voltage priority resistance level. (N6781A, N6785A)
Enables/disables the voltage priority resistance. (N6781A,
N6785A)
Sets the voltage slew rate.
Enables/disables the maximum slew rate override.
Sets the current slew tracking state. (N679xA)
Sets the negative current slew rate. (N679xA)
Enables/disables the maximum slew rate override. (N679xA)
Queries the operation event register.
Queries the operation condition register.
Sets the operation enable register.
Sets the negative transition filter.
Sets the positive transition filter.
Presets all Enable, PTR, and NTR registers.
Queries the questionable event register.
Queries the questionable condition register.
Sets the questionable enable register.
Sets the negative transition filter.
Sets the positive transition filter.
Returns the number of output channels in a mainframe.
Returns the model number of the selected channel.
Returns the option installed in the selected channel.
Returns the serial number of the selected channel.
Returns the initial socket control connection port number.
Configures the remote/local state of the instrument.
Reads and clears one error from the error queue.
(GROup commands do NOT apply to models N678xA SMU)
Returns the groups that have been defined.
Group multiple channels to create a single channel.
Keysight N6700C Series User's Guide