Keysight Technologies N6700C Serie Guide D'utilisation page 36

[SOURce:]
STEP
:TOUTput 0|OFF|1|ON, (@chanlist)
[SOURce:]
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:TRIGgered
[:AMPLitude] <value>, (@chanlist)
:BWIDth
[:RANGe] LOW|HIGH1|2|3, (@chanlist)
:LEVel LOW|HIGH1|2|3, <frequency>, (@chanlist)
:INHibit
:VON
[:LEVel] <value>, (@chanlist)
:MODE LATChing|LIVE|OFF
:LIMit
[:POSitive]
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:COUPle 0|OFF|1|ON, (@chanlist)
:NEGative
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:MODE FIXed|STEP|LIST|ARB, (@chanlist)
:PROTection
[:LOCal]
[:LEVel] <value>, (@chanlist)
:DELay
[:TIME] <value>, (@chanlist)
:REMote
[:POSitive]
[:LEVel] <value>, (@chanlist)
:NEGative
[:LEVel] <value>, (@chanlist)
:REVerse
:STATe 0|OFF|1|ON, (@chanlist)
:TRACking
[:STATe] 0|OFF|1|ON, (@chanlist)
:OFFSet <value>, (@chanlist)
:RANGe <value>, (@chanlist)
Keysight N6700C Series User's Guide
Specifies whether a trigger is generated when a step occurs.
Sets the output voltage.
Sets the triggered output voltage.
Sets the voltage bandwidth. (N678xA SMU)
Sets the bandwidth frequency. (N678xA SMU)
Current will sink if voltage is > voltage-on level. (N679xA)
Sets the under-voltage inhibit mode. (N679xA)
Sets the positive voltage limit. (N678xA SMU)
Sets the voltage limit tracking state. (N6784A)
Sets the negative voltage limit. (N6784A)
Sets the transient mode.
Sets the over-voltage protection level.
Sets the over-voltage protection delay. (N678xA SMU, N6783A)
Sets the positive remote OV protection. (N678xA SMU, N679xA)
Sets the negative remote OV protection. (N6784A)
Specifies the input state when a reverse voltage is detected.
(N679xA)
Enables/disables tracking over-voltage protection. (Option J01)
Sets the tracking OVP offset. (Option J01)
Sets the output voltage range.
1 Quick Reference
35