Keysight Technologies N6700C Serie Guide D'utilisation page 34

[SOURce:]
DIGital
:INPut
:DATA?
:OUTPut
:DATA <value>
:PIN<1-7>
:FUNCtion <function>
:POLarity POSitive|NEGative
:TOUTput
:BUS
[:ENABle] 0|OFF|1|ON
[SOURce:]
FUNCtion CURRent|VOLTage|RESistance|POWer, (@chanlist)
[SOURce:]
LIST
:COUNt <value>|INFinity, (@chanlist)
:CURRent
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:DWELl <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:POWer
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:RESistance
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:STEP ONCE|AUTO, (@chanlist)
:TERMinate
:LAST 0|OFF|1|ON, (@chanlist)
:TOUTput
:BOSTep
[:DATA] <Bool>{,<Bool>}, (@chanlist)
:POINts? (@chanlist)
:EOSTep
[:DATA] <Bool>{,<Bool>}, (@chanlist)
:POINts? (@chanlist)
:VOLTage
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
Keysight N6700C Series User's Guide
Reads the state of the digital control port.
Sets the state of the digital control port.
Sets the function of the pins. DIO |DINPut |FAULt |INHibit
|ONCouple |OFFCouple |TOUTput |TINPut
Sets the polarity of the pins.
Enables/disables BUS triggers on digital port pins.
Sets the output priority mode). (N678xA SMU, N679xA)
(LIST commands only on N676xA, N678xA SMU and Option 054)
Sets the list repeat count.
Specifies the setting for each list step.
Returns the number of list points (same as steps).
Specifies the dwell time for each list step.
Returns the number of list points (same as steps).
Specifies the setting for each list step. (N679xA)
Returns the number of list points (same as steps).(N679xA)
Specifies the setting for each list step. (N679xA)
Returns the number of list points (same as steps).(N679xA)
Specifies how the list responds to triggers.
Determines the output value when the list terminates.
Generates a trigger out at the Beginning Of STep
Returns the number of list points (same as steps).
Generates a trigger out at the End Of STep
Returns the number of list points (same as steps).
Specifies the setting for each list step.
Returns the number of list points (same as steps).
1 Quick Reference
33