Publicité
Les langues disponibles
Les langues disponibles
Remote Interface Configuration
USB Configuration
GPIB Configuration
LAN Configuration
Modifying the LAN Settings
Using the Web Interface
Using Telnet
Using Sockets
Securing the Interfaces
This Keysight N6700 MPS supports remote interface communication over three interfaces: GPIB, USB,
and LAN. All three interfaces are live at power on. For information on connecting the interfaces, refer
to
Interface
Connections.
The front panel IO indicator comes on whenever there is activity on the remote interfaces. The front
panel Lan indicator comes on when the LAN port is connected and configured.
Power system mainframes provide Ethernet connection monitoring. With Ethernet connection
monitoring, the instrument's LAN port is continually monitored, and automatically reconfigured when
the instrument is unplugged for a minimum of 20 seconds and then reconnected to a network.
USB Configuration
There are no configurable USB parameters. You can retrieve the USB connect string using the front
panel menu:
Front Panel Menu Reference
Select System\IO\USB
The dialog displays the USB connect string.
GPIB Configuration
Each device on the GPIB (IEEE-488) interface must have a unique whole number address between 0
and 30. The instrument ships with the address set to 5. Your computer's GPIB interface card address
must not conflict with any instrument on the interface bus. This setting is non-volatile; it will not be
changed by power cycling or *RST. Use the front panel menu to change the GPIB address:
Keysight N6700C Series User's Guide
SCPI Command
Not available
3 Getting Started
83
Publicité
