Keysight Technologies N6700C Serie Guide D'utilisation page 26

Command Quick Reference
Some [optional] commands have been included for clarity. All settings commands have a
corresponding query.
ABORt
:ACQuire (@chanlist)
:ELOG (@chanlist)
:TRANsient (@chanlist)
CALibrate
:COUNt?
:CURRent
[:LEVel] <value>, (@channel)
:LIMit
:NEGative <value>, (@channel)
:POSitive <value>, (@channel)
:MEASure <value>, (@channel)
:PEAK (@channel)
:DATA <value>
:DATE <"date">, (@channel)
:DPRog (@channel)
:LEVel P1|P2|P3
:PASSword <value>
:RESistance 20|6, (@channel)
:SAVE
:STATe 0|OFF|1|ON
:VOLTage
[:LEVel] <value>, (@channel)
:CMRR, (@channel)
:LIMit
:POSitive <value>, (@channel)
:MEASure <value>, (@channel)
:AUXiliary, (@channel)
DISPlay
[:WINDow]
[:STATe] 0|OFF|1|ON
:CHANnel <channel>
:VIEW METER1|METER4|METER_VIP
Keysight N6700C Series User's Guide
(ACQuire and ELOG commands only on N676xA, N678xA SMU, Option 054)
Cancels any triggered measurements.
Stops external data logging.
Cancels any triggered actions.
Returns the number of times the unit has been calibrated.
Calibrates the current programming.
Calibrates the negative current limit. (N678xA SMU, N6783A-BAT)
Calibrates the positive current limit. (N678xA SMU, N6783A, N679xA)
Calibrates the current measurement.
Calibrates the peak current limit. N675xA, N676xA)
Enters the calibration value read by the external meter.
Stores the calibration date in nonvolatile memory.
Calibrates the current downprogrammer.
Advances to the next level in the calibration.
Sets a numeric password to prevent unauthorized calibration.
Calibrates the output resistance. (N6781A, N6785A)
Saves the calibration constants in non-volatile memory.
Enables/disables calibration mode.
Calibrates the voltage programming.
Calibrates the voltage common mode rejection ratio. (N675xA, N676xA)
Calibrates the positive current limit. (N678xA SMU)
Calibrates the voltage measurement.
Calibrates the auxiliary voltage measurement. (N6781A, N6785A)
Turns the front panel display on or off.
Selects the channel in 1-channel view.
Selects 1-channel, 4-channel, or 1 channel with power view.
1 Quick Reference
25