Keysight Technologies N6700C Serie Guide D'utilisation page 28

*ESR? Returns event status register.
*IDN? Returns instrument identification.
*LRN? Returns a sequence of SCPI commands.
*OPC Enables "operation complete" bit in ESR.
*OPC? Returns a 1 when all pending operations complete.
*OPT? Returns option number.
*RCL <value> Recalls a saved instrument state.
*RDT? Returns output channel descriptions.
*RST Resets the instrument.
*SAV <value> Saves an instrument state.
*SRE <value> Sets service request enable register.
*STB? Returns the status byte.
*TRG Generates a trigger.
*TST? Performs a self-test, then returns results.
*WAI Pauses command processing until all device commands are done.
INITiate
[:IMMediate]
:ACQuire (@chanlist)
:ELOG (@chanlist)
:TRANsient (@chanlist)
:CONTinuous
:TRANsient 0|OFF|1|ON, (@chanlist)
LXI
:IDENtify
[:STATe] 0|OFF|1|ON
:MDNS
[:STATe] 0|OFF|1|ON
MEASure
[:SCALar]
:CURRent
[:DC]? (@chanlist)
:ACDC? (@chanlist)
:HIGH? (@chanlist)
:LOW? (@chanlist)
:MAXimum? (@chanlist)
:MINimum? (@chanlist)
:POWer
[:DC]? (@chanlist)
:MAXimum? (@chanlist)
:MINimum? (@chanlist)
Keysight N6700C Series User's Guide
(ACQuire and ELOG commands only on N676xA, N678xA SMU, Option 054)
Initiates the measurement trigger system.
Initiates external data logging.
Initiates the transient trigger system.
Continuously initiates the transient trigger system.
Turns the front panel LXI identify indicator on or off.
Controls the state of the mDNS server.
Takes a measurement; returns the averaged current.
Takes a measurement; returns the RMS current (AC + DC).
Takes a measurement; returns the High level of a current pulse.
Takes a measurement; returns the Low level of a current pulse.
Takes a measurement; returns the maximum current.
Takes a measurement; returns the minimum current.
Takes a measurement; returns the averaged power. (N676xA, N678xA SMU)
Takes a measurement; returns the maximum power.
Takes a measurement; returns the minimum power.
1 Quick Reference
27