Keysight Technologies N6700C Serie Guide D'utilisation page 29

1 Quick Reference
:VOLTage
[:DC]? (@chanlist)
:ACDC? (@chanlist)
:HIGH? (@chanlist)
:LOW? (@chanlist)
:MAXimum? (@chanlist)
:MINimum? (@chanlist)
:ARRay
:CURRent
[:DC]? (@chanlist)
:POWer
[:DC]? (@chanlist)
:VOLTage
[:DC]? (@chanlist)
OUTPut
[:STATe] 0|OFF|1|ON [,NORelay], (@chanlist)
:COUPle
[:STATe] 0|OFF|1|ON
:CHANnel [<value>, {<value>}]
:DOFFset <value>
:MODE AUTO|MANual
:MAX
:DOFFset?
:DELay
:FALL <value>, (@chanlist)
:RISE <value>, (@chanlist)
:PMODE VOLTage|CURRent, (@chanlist)
:TMODE HIGHz|LOWZ, (@chanlist)
:INHibit
:MODE LATChing|LIVE|OFF
:PON
:STATe RST|RCL0
:PROTection
:CLEar (@chanlist)
:COUPle0|OFF|1|ON
:DELay <value>, (@chanlist)
:OSCillation0|OFF|1|ON, (@chanlist)
:TEMPerature
:MARGin? (@chanlist)
:WDOG
[:STATe] 0|OFF|1|ON
:DELay <value>
28
Takes a measurement; returns the averaged voltage.
Takes a measurement; returns the RMS voltage (AC + DC).
Takes a measurement; returns the High level of a voltage pulse.
Takes a measurement; returns the Low level of a voltage pulse.
Takes a measurement; returns the maximum voltage.
Takes a measurement; returns the minimum voltage.
(ARRay commands only on N676xA, N678xA SMU and Option 054)
Takes a measurement; returns the instantaneous current.
Takes a measurement; returns the instantaneous power. (N676xA, N678xA SMU)
Takes a measurement; returns the instantaneous voltage.
Enables/disables the output.
Enables/disables output coupling.
Selects which channels are coupled.
Sets a delay offset to synchronize coupled output state changes.
Specifies the output delay offset coupling mode.
Returns the delay offset required for this instrument.
Sets the output turn-off sequence delay.
Sets the output turn-on sequence delay.
Sets the mode for turn-on/off transitions. (N6761A, N6762A)
Specifies the turn-on/turn-off impedance. (N678xA SMU)
Sets the operating mode of the remote inhibit digital pin.
Set the output power-on state.
Resets the latched protection.
Enables/disables channel coupling for protection faults.
Sets the over-current protection programming delay.
Enables/disables output oscillation protection. (N678xA SMU)
Returns the margin remaining before the over-temperature trips.
Enables/disables the I/O watchdog timer.
Sets the watchdog delay time.
Keysight N6700C Series User's Guide