Keysight Technologies N6700C Serie Guide D'utilisation page 33

1 Quick Reference
:FUNCtion
:SHAPe <function>, <step#>, (@chanlist)
:PACing DWELl|TRIGger, <step#> (@chanlist)
:RESISTANCE <function>, <step#> (@chanlist)
:VOLTage <function>, <step#> (@chanlist)
:TERMinate
:LAST 0|OFF|1|ON, (@chanlist)
:TERMinate
:LAST 0|OFF|1|ON, (@chanlist)
[SOURce:]
CURRent
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:TRIGgered
[:AMPLitude] <value>, (@chanlist)
:LIMit
[:POSitive]
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:COUPle 0|OFF|1|ON, (@chanlist)
:NEGative
[:IMMediate]
[:AMPLitude] <value>, (@chanlist)
:MODE FIXed|STEP|LIST|ARB, (@chanlist)
:PROTection
:DELay
[:TIME] <value>, (@chanlist)
:STARt SCHange|CCTRans, (@chanlist)
:STATe 0|OFF|1|ON, (@chanlist)
:RANGe <value>, (@chanlist)
:SLEW
[:POSitive]
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
:COUPle 0|OFF|1|ON, (@chanlist)
:NEGative
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
32
Creates a new sequence step
Specifies the type of pacing for the step
Programs the steps in a resistance sequence
Programs the steps in a voltage sequence
Sets the sequence termination mode
Sets the Arb termination mode
Sets the output current.
Sets the triggered output current
Sets the positive current limit. (N678xA SMU, N6783A, N679xA)
Sets the current limit tracking state. (N678xA SMU)
Sets the negative current limit. (N678xA SMU, N6783A-BAT)
Sets the transient mode.
Sets the over-current protection delay.
Specifies what starts the over-current protection delay timer.
Enables/disables the over-current protection.
Sets the output current range.
Sets the current slew rate. (N678xA SMU, N679xA)
Enables/disables the maximum slew rate override. (N678xA SMU,
N679xA)
Sets the current slew tracking state. (N679xA)
Sets the negative current slew rate. (N679xA)
Enables/disables the maximum slew rate override. (N679xA)
Keysight N6700C Series User's Guide