Keysight Technologies N6700C Serie Guide D'utilisation page 23

1 Quick Reference
1st Menu Level 2nd Level
Arb
TrigSource
Control
Protect OVP
OCP
OPP
OT
Inh
Coupling
Wdog
Osc
Clear
States Reset
SaveRecall
PowerOn
22
3rd & 4th Levels Description
Repeat Specifies number of list repetitions or continuous list
Terminate Specifies list settings when the list terminates
Config Configures voltage, current, resistance, or power list settings
Reset Aborts the list and resets all list parameters
Repeat Specifies the number of times the Arb repeats
Terminate Specifies the settings when the Arb terminates
Function Selects the Arb type and shape
Config Step
Specifies the Step level and time
Ramp Specifies the Ramp level and time
Stair Specifies the Staircase level and time
Sine Specifies the Sine parameters
Pulse Specifies the Pulse level and time
Trap Specifies the Trapezoid level and time
Exp Specifies the Exponent parameters
CD Specifies the Constant-Dwell parameters
Specifies the transient and Arb trigger sources
Initiates, Triggers, or Aborts triggers; displays trigger state
Configures over-voltage protection function
Configures over-current protection function
Configures over-power protection function
Returns the over-temperature protection margin
Configures the external inhibit signal
Disables ALL output channels for a protection fault
Configures the output watchdog timer
Enables/disables oscillation protection on N678xA SMU
Clears protection conditions and displays output status
Resets all instrument settings to the reset (*RST) state
Saves and recalls instrument settings
Selects the power-on instrument state
Keysight N6700C Series User's Guide