Publicité
Les langues disponibles
Les langues disponibles
Specifications
Supplemental Characteristics
Dimension Diagrams
This section lists the supplemental characteristics of the Keysight N6700C Modular Power System.
Supplemental characteristics are not warranted but are descriptions of performance determined by
design or by type testing. All supplemental characteristics are typical unless otherwise noted.
Specifications and characteristics are subject to change without notice.
Complete specifications and supplemental characteristics information for all power
modules are included in the
Specifications
Supplemental Characteristics N6700C, N6701C, N6702C
Characteristic
Maximum Total Power Available for Power
Modules:
Internal Flash memory:
Protection Response
INH Input:
Fault on coupled output:
Command Processing Time:
Digital Control Characteristics
Maximum voltage ratings
Pins 1 and 2 as FLT output
Pins 1 - 7 as digital/trigger outputs
(pin 8 = common)
Pins 1 - 7 as digital/trigger inputs and pin
3 as INH input (pin 8 = common)
Keysight N6700C Series User's Guide
Keysight N6700 Modular Power System Family
Guide.
Keysight N6700C, N6701C, N6702C
400 W (for N6700C mainframes)
600 W (for N6701C mainframes)
1200 W (for N6702C mainframes)
8 Mbytes
5 µs from receipt of inhibit to start of shutdown
< 10 µs from receipt of fault to start of shutdown
≤ 1 ms from receipt of command to start of output change
+16.5 VDC/-5 VDC between pins
(pin 8 is internally connected to chassis ground).
Maximum low-level output voltage = 0.5 V @ 4 mA
Maximum low-level sink current = 4 mA
Typical high-level leakage current = 1 mA @ 16.5 VDC
Maximum low-level output voltage = 0.5 V @ 4 mA;
1 V @ 50 mA; 1.75 V @ 100 mA
Maximum low-level sink current = 100 mA
Typical high-level leakage current = 0.8 mA @ 16.5 VDC
Maximum low-level input voltage = 0.8 V
Minimum high-level input voltage = 2 V
Typical low-level current = 2 mA @ 0 V (internal 2.2k pull-up)
Typical high-level leakage current = 0.12 mA @ 16.5 VDC
1 Quick Reference
43
Publicité
