First Commissioning | Inspections Before Starting A Ride; Initial Operation - Prophete CITY Notice D'utilisation

FIRST COMMISSIONING | INSPECTIONS BEFORE STARTING A RIDE

FIRST COMMISSIONING |
INSPECTIONS BEFORE STARTING A RIDE
DANGER OF DAMAGE AND ACCIDENTS!
• Check whether your bicycle is safe for operation before every ride. Remem­
ber that your bicycle may have fallen over when you did not see it or that
WARNING!
third parties may have manipulated it.
• Perform the following inspections before every ride and make any settings
that are necessary. Non­observance may lead to damage to the bicycle or fai­
lure of important parts!

INITIAL OPERATION

The bicycle was delivered in the pre-installed condition for shipping-technical reasons. This me-
ans that not all parts and screws will be tightened ex works. Before initial commissioning, you
must tighten and may have to set the following components:
• Saddle clamp
• Headlights
• Handlebar, stem and any
handlebar attachments (such as brake grips,
bell, gearshift lever, rotary handle switch, display/operating unit)
For more detailed information about setting and installation, see the following chapters of the bi-
cycle components.
BEFORE STARTING THE RIDE
Before every ride, you must check the following parts for function or tight fit:
• Lighting
• brakes (incl. tightness at hydr. brake system)
• deflection/damper/shock
• handlebar
• pedals
• rims (check for wear and concentricity)
• tyres (check for damage and barometric pressure)
Additionally, you must comply with the intervals indicated in the maintenance plan for regular in-
spection and repair and observe the care and maintenance instructions (see chapter Mainte-
nance | Care).
EN EN 10
• Pedals
• Basket
• spokes
• bicycle bell
• saddle
• gearshift
• quick-clamp