Removing The Front Wheel; Installing The Front Wheel; Rear Wheel - Prophete CITY Notice D'utilisation

Masquer les pouces Voir aussi pour CITY:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WHEELS

REMOVING THE FRONT WHEEL

1. V-brake rim brake: Disconnect the brake cable
take out the wheel more easily later.
Hydraulic rim brake: Open the quick-clamping lever
rim brake [OPEN].
2. Hydraulic rim brake: Take the brake cylinder
ver socket
in order to take out the wheel more easily later.
78
3. Release the nuts that ensure tight fit of the front wheel with a
15 mm wrench (depending on design).
4. Take the nuts including washers off the axle.
5. Pull out the front wheel from the axle holder.

INSTALLING THE FRONT WHEEL

1. Insert the front wheel straight into the axle.
2. Push the washers and nuts onto the axle.
3. Tighten the axle nuts again with a 15 mm wrench (see chapter
on torque specification).
4. Place both caps onto the axle nuts.
5. V-brake rim brake: Connect the brake cable
Hydraulic rim brake: Push the brake cylinder
the cantilever socket
6. Hydraulic rim brake: Close the quick-clamping lever
If the lever closes too easily, the quick-clamping screw must be
adjusted (see chapter Brakes).
7. Check that the rim brake works properly. Adjust it if necessary
(s. chapter Brake).

REAR WHEEL

The procedure for removing and installing the rear wheel depends
on the gearshift system installed (see chapter Gearshift).
EN
EN
32
.
78
in order to
77
of the
80
off the cantile-
79
again.
77
back onto
79
[CLOSE].
77
77
78
80
79

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

UrbanTrekkingVtt

Table des Matières