PEDALS
DANGER OF DAMAGE AND ACCIDENTS!
• The pedals must be tightened well at all times since they may otherwise
break out of their threads! Therefore, check both pedals for tight fit before
WARNING!
every ride.
• if the pedals are swapped during installation, the threads will suffer damage
and may break out of the pedal arm after a while! No warranty if this is not
observed!
INSTALLING THE PEDALS
1. Screw the right pedal on clockwise (right-hand thread) and the
left pedal counter-clockwise (left-hand thread) (
two pedals with a 15-mm open-faced spanner or, if this is to tech-
nically possible, with a 6-mm hexagon socket wrench according to
the torque specifications (see chapter with torque specifications).
HOLDING THE FOLDING PEDALS IN/OUT
DANGER OF ACCIDENT!
• Before every ride, check that the pedals are latched well.
WARNING!
1. Push the slider
02
2. Fold the pedals into the desired position
.
03
in.
). Tighten the
01
02
PEDALS
01
L
R
L = Left-hand thread
R = Right-hand thread
03
EN 11