SOLIS GELATERIA PRO Mode D'emploi page 129

QUESTION
How do I prepa-
re very soft ice
cream (soft
serve)?
I want my ice
cream even har-
der!
Can I not add
my mix-ins
directly to the
mixture?
My ice cream
machine seems
to vibrate brief-
ly.
The control
panel does not
work.
The ice cream
machine does
not remember
it's last setting.
Temperature is
displayed in
Fahrenheit.
Ice cream is not
cooled although
compressor is
on.
ANSWER
• The varieties of ice cream on the hardness indicator only serve
as a rough guide. Try out the softest setting, „Sorbet". Should
the ice cream turn out too soft, you can use a harder setting.
• Remove finished ice cream from the bowl, place in an air-tight
container and put in freezer for 1 to 2 hours or as long as it
takes for ice cream to reach desired hardness.
• We recommend adding mix-ins at the end when the ADD MIX-
INS indicator is flashing. Note: Often ingredients will blend
when added too early.
• The built-in compressor is mounted on special rubber feet to
minimize noise and vibration during use. When no cooling is
necessary, the compressor will automatically turn off and small
vibrations could occur for 1 - 2 seconds. This is absolutely nor-
mal.
• Did you activate the child lock? Press the HOLD button
2 seconds to deactivate the child lock.
• The built-in computer will only remember settings when the
START/PAUSE button was pressed.
• Press the button to change temperature unit to Celsius.
• Is the PRE-COOL function activated?
• To increase compressor life, a self timer is built in. Please allow
3 minutes for the compressor to reactivate.
for
129