Publicité
Important
WiFi - Operates with IEEE802.11 b, g and n at 2.4 GHz only.
Compatibility - Kenwood & Me App compatible with latest versions of iOS and Android.
Factory reset - When disposing of the appliance, it is important to factory reset it to protect your personal data.
Selecting this option will erase all WiFi data stored on the appliance and restore it to factory settings.
To factory reset your appliance, select
Settings
> My Device > Factory Reset
Network reset - use forget network function to erase all WiFi data stored on the appliance.
To connect to a new network, the appliance needs to pair up again through your smart phone or tablet.
To network reset your appliance , select Settings>Connectivitiy>Network Settings> Forget Network
The Kenwood & Me App will allow limited control of your appliance through your smart phone or tablet.
1
Plug in and press the On/Off switch on the side of the power unit.
2
The app can be downloaded by scanning the QR code which appears on the display screen. (Note if the QR code is not scanned
when first switching on the machine, press the wifi symbol
3
Follow the on screen instructions.
To Set Up Your Cooking Chef
Usage Diagram and Usage Instructions
F1
F4
Important
Make sure the induction area, temperature sensors and external surface of the bowl base are clean. Failure to do this will affect the
heat sensor, resulting in poor cooking performance.
Do not use the stir tool with the dough tool, K-Beater or creaming beater.
Splashguard Assembly
The splashguard assembly consists of 2 pieces: the heat shield and the splashguard.
The heat shield is to protect the mixer head from steam produced during the cooking process
The splashguard should not be fitted to the bowl unless used in conjunction with the heat shield.
Only fit and remove the splashguard when the mixer head is in the locked, lowered position.
in the corner of the screen to access the QR code).
F2
F5
9
F3
F6
F7
Publicité
