Model 100199
SPECIFICATIONS
CHAMPION 439CC ENGINE
The 439cc engine was initially developed by Champion for use in Champion portable generators. The single cylinder, overhead design
provides high output, efficient operation, low maintenance and demonstrated long life.
Based on the engine's power, performance and reliability, it was selected to power the 8.5kW Champion Home Stand by generator. This
engine design has been used in production since 2008.
The following are the engine specifications:
•
Type
•
No. of Cylinders
•
Displacement
•
Cylinder Block
•
Cylinder Head
•
Ignition System
•
Governor
•
Starter
•
RPM
•
Oil Capacity
CHAMPION 439 CC ENGINE TORQUE SPECIFICATIONS
•
Crankcase Cover Bolts
•
Connecting Rod Bolts
•
Rocker Cover Screws
•
Cylinder Head Bolts
•
Intake Manifold Screws
•
Carburetor to Intake Manifold
•
Blower Housing
•
Flywheel Nut
•
Ignition Coil Bolts
•
Starter Motor Bolts
•
Spark Plug
•
Air Cleaner box to Carb
•
Exhaust pipe nuts
MASTER MIXING ASSEMBLY JETS (CARBURETOR SYSTEM)
•
Idle/low-speed Jet
•
Main Jet
18
Part No. 101049 Rev. B
Champion OHV (Over head valve)
1
439cc
Aluminum with cast-iron sleeve
Automotive harden valves and seats
Solid state – magneto
Mechanical
Electric 24V DC
3,600
1.2 qt. (1.1 L)
24.4 Nm (216 in.-lbs)
18 Nm (156 in.-lbs)
5.4 Nm (48 in.-lbs)
39 Nm (29 ft-lbs) (348 in.lbs)
9.5 Nm (84 in.-lbs)
9.5 Nm (84 in.-lbs)
12.2 Nm (108 in.lbs)
115 Nm (85 ft-lbs)
9.5 Nm (84 in.-lbs)
24.4 Nm (216 in.-lbs)
20 – 30 Nm (14.8 – 22.1 ft-lbs) (178 in.lbs – 265 in.lbs)
9 Nm (84 in.-lbs)
18 Nm (13 ft.-lbs) (156 in.lbs)
1.8-2.5 Nm (15.9-22.1 in. lbs)
1.2-1.5 Nm (10.6-13.2 in. lbs)