Transition Styles And Dves - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

In the demonstration below ATEM Mini will switch from input 1 to input 2 using a mix transition:
To perform a mix auto transition:
1 Press the 'mix' button to select a mix transition.
2 Now press a duration you want for the mix.
3 Press the 'auto' button to tell ATEM Mini you want to use an automated transition.
4 Press the input 2 button to perform the mix transition.
You will now see inputs 1 and 2 buttons illuminated red while the transition happens and your
broadcast changes to input 2. When the transition is complete, input 2 will be illuminated red
to indicate it is now live on air.

Transition Styles and DVEs

The buttons above the 'auto' button contain different transition styles, including a mix cross
dissolve and a dip to color.
You can also select horizontal and vertical wipe transitions by pressing their respective
transition style buttons. These also include DVE push and squeeze transitions.
Press the transition type button for the transition you want to use, for example a
horizontal or vertical wipe, push or squeeze DVE transition, and mix or dip transition
Switching your Production 11