Stream Buttons - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

One of the most exciting new features on ATEM Mini Pro is the multiview. This powerful feature
displays a multiview on the HDMI video output that shows a comprehensive overview of your
production. All 4 HDMI input sources, the program and preview outputs, plus important
recording, streaming and audio status information is presented on one screen so you always
know exactly what is happening during your broadcast!
This section describes all the additional features on ATEM Mini Pro and how to use them.

Stream Buttons

Streaming is built into the ATEM Mini Pro model, so you don't need to use any complicated
software to get started. Just use the included ATEM Software Control to select what streaming
service you intend to use and then enter in the streaming key. Once you have completed this
setup, you can simply press On Air to go live! There is more information in the live streaming
section of this manual.
The stream buttons labelled 'on air' and 'off' let you start
and stop streaming directly from your ATEM Mini Pro
When your broadcast has finished, all you need to do is press the 'off' stream button and your
stream is stopped. This means once you are set up and streaming, your ATEM Mini Pro is
completely independent and you don't need to go back to your computer to stop and close
your stream.
TIP After your streaming details are entered into the 'output' palette in ATEM Software
Control, your streaming setup is now stored in your ATEM Mini Pro so you can start
streaming again immediately, even after a power cycle. This makes it easy to stream a
new broadcast without having to reset your streaming software every time.
On ATEM Mini Pro, it is actually easier and faster to stream via Ethernet. This lets you
stream immediately via any internet connection on a computer or internet router,
while simultaneously giving you the additional benefits of ATEM Software Control over
the same connection.
For information on setting up streaming and control via Ethernet, refer to
'direct streaming and switcher control via Ethernet' later in this section.
Additional Features on ATEM Mini Pro 15