Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation page 19

Now you have copied the stream key for your broadcast, you will need to paste it into the
stream details in ATEM Software Control.
1
In ATEM Software Control's processing palettes,
click on the 'output' tab.
Open the 'live stream' palette.
3
In the 'key' setting, paste the stream key you
copied from YouTube.
5
With all the streaming details now set, it's worth
performing a quick test broadcast to make sure
everything is working. Press the 'on air' button on
ATEM Mini Pro, or click on the on air button in the
live stream palette.
YouTube Studio is now ready to start broadcasting. It may take a few moments for the memory
buffer to initiate. When the buffering is complete, the 'go live' button will appear in the YouTube
Studio manager and all you need to do is click 'go live'.
You are now broadcasting!
To test that everything is working properly, click the 'share' icon, copy the link and paste it into a
new window or tab in your internet browser. You can now monitor your live stream just like a
member of your audience.
2
Set the platform to YouTube by clicking in the
menu and selecting YouTube from the drop down
list. Set the server to 'primary'.
4
Set the streaming quality to low, medium, or high.
This will also set the quality for the recording output
via USB-C.
Additional Features on ATEM Mini Pro 19