Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation page 33

The following processing palettes are available.
Palettes Tab
The 'palettes' tab contains the following processing controls.
Color Generators Your ATEM switcher has two color matte generators which can be configured
from the color generators palette using a color picker or by setting hue,
saturation, and luminance levels.
Upstream Key The switcher's upstream keyer can be configured from the upstream key
palette. Within the keyer palette, the keyer can be configured as a luma key,
chroma key, pattern key or DVE. The type of key available will also depend
on if the DVE is available. The upstream key palette will display all the
parameters that are available to configure the keyer. More information on
how to use upstream keyer is included later in this manual.
Transitions The transitions palette is where you can configure the parameters of each
transition style. For example, for the dip transition the palette has a drop
down menu where you can select the dip source and for the wipe transition
the palette displays all the available wipe patterns. There are lots of
variations of transitions and a large number of transitions can be created by
combining settings and features in the transitions palette.
NOTE It's worth noting that selecting a specific style of transition in this palette will
only adjust the settings for these transitions, and you still need to select the style of
transition you want to perform in the transition control section on the software or
ATEM Mini's control panel. The software and ATEM Mini's control panel work together
and mirror all settings, so you can use any combination you like!
Downstream Key ATEM Mini has a downstream keyer which can be configured from the
downstream key palette. The palette has drop down boxes for selecting the
fill and key signals to the keyer, plus sliders to set the pre multiplied key clip
and gain values, and mask settings.
Fade to Black
The fade to black palette is where you can set the fade to black transition
rate. An 'Audio Follow Video' checkbox is also provided as a shortcut for the
audio mixer's master fader AFV button. Selecting this feature lets you fade
your audio with your fade to black.
ATEM Software Control 33