Media Player Tab; Output Tab - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

Media Player Tab

The 'media player' tab contains controls for your ATEM Mini's media player and connected
HyperDecks.
Media Player
Your ATEM Mini has a media player that plays back the stills that are stored in
the media pool memory built into the switcher. The drop down list is used to
select the still that will be played or made available on the media player input
to the switcher.
Hyperdecks You can connect up to 4 Blackmagic HyperDeck Studio model disk recorders
and control them using ATEM Software Control's HyperDecks palette.
For more information refer to the 'HyperDeck Control' section of this manual.

Output Tab

The output tab lets you capture a still image from the program output. When using ATEM Mini
Pro, this tab also contains additional options for you to live stream, record your stream and set
the timecode generator. The capture video option supports the original ATEM production
switchers that feature legacy USB output recording.
Live Stream
When using ATEM Mini Pro, this important output option lets you set up your live stream by
entering the streaming details from your streaming platform. After assigning all the settings, you
can start your broadcast by clicking the 'on air' button, then stop the broadcast by clicking 'off'.
The live stream status will clearly show you are on air by displaying a large red 'on air' indicator
together with the timecode generator, which you can set using the timecode generator options.
ATEM Software Control 34