Fade To Black; Using A Still Graphic; Additional Features On Atem Mini Pro - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

Fade to Black

The fade to black button is an easy way to start and end live broadcasts. Fade to black
performs a mix to black which happens across all video layers at the same time. This means all
video inputs, stills and any upstream or downstream keyers that are visible in your broadcast.
When performing a fade to black, the master program audio will also fade out to silence.
Simply press the FTB button to perform the fade to black. The button will flash while enabled.
To fade up from black, simply press the FTB button again. This is a clean way of starting and
finishing a broadcast.

Using a Still Graphic

The 'still' button is another input source you can switch to in your production. Simply press the
'still' button to switch a still loaded in the media player to air.
To take the graphic off air, simply switch to a different input source.
The 'still' button will switch a graphic loaded in ATEM Software Control's media pool.
ATEM Software Control is an extremely powerful software control panel that opens a
world of options and lets you do a lot more with ATEM Mini.

Additional Features on ATEM Mini Pro

ATEM Mini Pro has additional features that give you more options for your broadcast and even
more ability to control your production directly from the unit without the need for a computer.
Dedicated buttons on the control panel let you switch sources to the HDMI output, start/stop
streaming and start/stop recording.
With ATEM Mini Pro, you also have the choice of streaming via the webcam output or direct
streaming via Ethernet. At any time, you can record your broadcast to an external disk via
USB-C and use the dedicated record buttons on ATEM Mini Pro to start and stop recording.
Additional Features on ATEM Mini Pro 14