Using Audio; Connecting Other Audio Sources; Using Embedded Hdmi Audio Sources - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

Using Audio

Connecting other Audio Sources

Your ATEM switcher features 3.5mm jack inputs so you can connect external microphones and
audio sources, for example music players.
3.5mm jack inputs let you connect external analog audio,
for example microphones and music players

Using Embedded HDMI Audio Sources

Your ATEM Mini includes a built-in audio mixer that lets you use the embedded HDMI audio
from your cameras, media servers and other inputs without the need for an external
audio mixer.
Once you've connected your HDMI cameras to the switcher for vision mixing, there are no other
connections to make as the audio mixer uses the embedded audio in the video signal. This
saves space and makes setup very fast and low cost as you don't need separate audio
connections for every video source, and you don't need an external audio mixer unless you
prefer to use one.
The audio is mixed using the control buttons on your ATEM Mini, or via the Audio tab of ATEM
Software Control and output over USB webcam and HDMI outputs as embedded digital audio.
Using Audio 148