Camera Control Panel Layout - Blackmagic Design ATEM Mini Manuel D'installation Et D'utilisation

Camera Control Panel Layout

Each CCU on your camera control panel is exactly the same with the same controls. The menu
settings are primarily controlled using the left CCU's LCD and soft buttons.
LCD Menu Settings
Pressing the 'home' soft button returns you to main home screen. From the home screen, you
can access all your camera control panel's settings including the network settings, auxiliary for
camera control, master black enable and disable settings and the brightness settings for
adjusting the lights on the various panel controls. You can also identify the software version
installed on your camera control panel and the ATEM switcher your panel is connected to.
BANK A RECALL ALL
CAMERA CONTROL
Camera 1
Each CCU has exactly the same controls.
SETTINGS BANK A
CAMERA CONTROL
Camera 1
1
CAMERA
Camera Banks A and B
When the LCD is set to the home screen, you will see the camera bank setting at the
top of the display. This setting displays which bank of cameras you are controlling,
which is an important feature when using larger ATEM switchers controlling up to
20 Blackmagic Design cameras.
For example, imagine you are controlling 8 cameras and you want to have a dedicated
CCU assigned to each camera. You can assign cameras 1 to 4 for each CCU on bank A,
then assign cameras 5 to 8 to each CCU on bank B.
RECALL ALL
The home screen displays
features you may need access
to at all times, for example
selecting the desired camera
bank and recalling scene
files for all cameras
Using ATEM Camera Control Panel 137