Special Functions; General Functions - Corghi R.E.M.O. COMPACT Manuel D'utilisation

Recalculate measurement Repeat
measurement from beginning.
Find wheel It carries out the find-wheel
procedure for the wheel of the vehicle selected
as follows:
Truck/motorhome selection Notifies
the programme that the measuring procedure
is carried out on a truck or motorhome (vehicles
with extensive wheel bases).
Vehicle selection Recalls selection of
the vehicle from the databank.
Databank data summary Recalls the full
summary vehicle's databank references.
Chassis situation Recalls the vehicle
chassis situation step.
Visual check Recalls the procedure for
visual checking of the vehicle.
End of session Ends the current job
and returns to the main menu.
Vehicle adjustment Selects the help
function for adjustment of the vehicle. Only the
help selections available are active.
Stop measuring Interrupts the measur-
ing procedure at whatever point it is in.

General functions

Continue Moves on to the next pro-
gramme step in the pre-set sequence.
Last step Returns to the previous pro-
gramme step.
Skip operation Skips to the next pro-
gramme step without requiring execution of the
current step.
66
Back to selection Moves the active
cursor from the icon bar to the working zone.
Increase Increases the value of the
selected object (for example, it increases the
rim diameter to the value above).
Decrease Decreases the value of the
selected object (for example, it decreases the
rim diameter to the value below).
Exit Ends the current operation.
Next page Displays the sequence of
pages of the on-line help function. The icon is
only active when there is more than one page.
Save Saves thevehicle's pre-adjustment
values.
Yes Confirms the selection made or the
value entered.
No / Abort Aborts the selection made
or the value entered.
User code For changing the user code.
Manufacturer's Set-up Changes the set-
up settings, entering the CORGHI factory defaults.

Special functions

Single value Shows only one angle of
the selected axle at a time.
Maximum steering angle Activates
and deactivates the maximum steering angle
procedure.
Raise lift Informs the application that
the lift will be raised for the adjustment.
Operator's manual R.E.M.O. COMPACT