At this point it is necessary to work on the
regulators of one of the two wheels. Inter-
vention on the right rear wheel is shown
in the example.
You then need to work on the regulators
of the other wheel. Intervention on the
left rear wheel is shown in the example.
WARNING: if, when adjusting the regu-
lators of a single wheel, the values of
the wheel alignment adjusted previously
should change, go back and readjust
the regulators of the previous wheel!
Select the icon in the figure and press
ENTER to see the wheel alignment values
relating to the front axle:
The measuring robots move near the rear
wheels:
88
Operator's manual R.E.M.O. COMPACT