Corghi R.E.M.O. COMPACT Manuel D'utilisation page 75

The execution of the steering lock or the
icon moves the program directly on to front axle
measurement.
(13) Second front axle
measurement
Repetition of the front axle measurement proce-
dure allows any corrections to the adjustments
already made.
(14) Printout of the data measured
To access this function from the rest of the pro-
gramme select the
The printout serves to inform the customer about
the operations performed and as a reference for
subsequent checks on the vehicle.
IMPORTANT: No standard printer is supplied
with this aligner. It is the user's responsibility to
see to installing either an external or network
printer if and as required.
(15) Print-out in graphic format
The current printed report, supplied in alphanu-
meric form, has now been updated with the addi-
tion of two annexes consisting of graphics which
illustrate some information about the vehicle in
intuitive form.
The first annex, entitled "Vehicle Situation",
shows the toe, camber and setback values before
and after adjustment.
The second annex, entitled "Chassis Situation",
lists the set-back, track difference, wheel base
difference, side offset and offset values of the
axles after adjustment.
EXAMPLE OF MEASURING A WHEEL
ALIGNMENT
Once the vehicle is on the lift and you have made
certain there are no objects that could hinder
movement or the line of vision between the ro-
botized units or vehicle, launch the application.
The following screen page opens:
Operator's manual R.E.M.O. COMPACT
icon or the F4 key.
Press ENTER or select the
The menu goes to the next page:
Select the vehicle, navigating the list of available
brands and models:
Press ENTER to confirm your choices. In the
next window you have the possibility of entering
some geometric data of the wheels and vehicle:
icon.
EN
75