Corghi R.E.M.O. COMPACT Manuel D'utilisation page 81

To continue measuring the angles with
the wheels steered at 10° or 20° select
the icon shown in the figure and press
ENTER:
Then follow the instructions given on
the screen: to begin with the procedure
requires you to turn the steering wheel in
the direction shown by the arrow in the
icon on the screen:
Continue turning the steering wheel until
the white progress bar (shown in the
figure) reaches the steering values posi-
tioned at 10° or 20° (shown in the figure):
20 10
Once the steering wheel has reached
desired the steering angle and this is
maintained, the procedure shows an icon
EN
informing that the measuring value has
been saved in the memory:
Then follow the instructions given on the
screen: now the procedure requires you
to turn the steering wheel in the direction
indicated by the arrow in the icon (op-
posite to the previous direction):
Operator's manual R.E.M.O. COMPACT 81