Special Functions; Menu Management; Runout Compensation; Databank - Corghi Exact 70 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MERCEDES Set-up Changes the set-up
settings, entering the defaults required by the
manufacturer for alignment of MERCEDES cars.
Manufacturer's Set-up Changes the set-up
settings, entering the CORGHI factory defaults.

Special functions

Calibration check Checks calibration of the
sensors fitted on the car (with 8 sensors only).
Maximum steering angle Activates and de-
activates the maximum steering angle procedure.
2WS steering angle Recalls the steering an-
gle procedure for vehicles with 2-wheel steering.
4WS steering angle Recalls the steering an-
gle procedure for vehicles with 4-wheel steering.
Adjustment with car lifted Starts the pro-
cedure for adjusting an axle with the car lifted.
End of adjustment with car lifted Ends the
procedure for adjusting an axle with the car lifted,
lower the vehicle.
Data transfer Automatic chassis clear-
ance data transfer from the instrument to the
wheel aligner.
Chassis input degrees Manual compilation
of the chassis height record with data in degrees.
Chassis input mm Manual compilation of
the chassis height record with data in millimetres.
62
Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
http://www.eichstaedt-elektonik.de
Mercedes Clamp Selects the procedure
with Mercedes wheel clamps, automatically skips
the ROC procedure.
Self-centring clamp Selects the proce-
dure with self-centring clamps, ROC procedure is
compulsory.

menu management

Open menu Opens the menu containing
the additional icons for which there is no room in
the icon bar.
Recall other icons Displays the second
set of icons in the sub-menu.
Close menu Closes the menu containing
the additional icons.

rUNoUT Compensation

Two point ROC Recalls the two point
compensation procedure.
ROC skip Continues vehicle alignment op-
erations, skipping the compensation procedure.
ROC recall Recalls the compensation
values saved previously.
ROC Fast ROC procedure which can be
performed moving around the vehicle just once.

Databank

Car markets Selection of the distribution
markets of the databank vehicles.
Commercial description of vehicle
Description of the vehicle with the commercial
name.
Manufacturer's description of vehicle
Description of the vehicle with the name given by
the manufacturer for univocal identification of the
alignment reference data.
Operator's Manual EXACT 70

Publicité

Table des Matières
loading

Table des Matières