Danger Warning Decals; Bead Breaking; Deciding From Which Side Of The Wheel The Tyre Must Be Demounted; Special Instructions - Corghi A 2025 LL Manuel D'utilisation

22 Shoe guard.
23 LL head control valve
24 Hook actuator cylinder
25 Doyfe connector (fits onto tyre valve
for inflation)
WARNING
For technical characteristics, warnings,
maintenance instructions and all other
information concerning the air tank,
consult the relative usage and mainte-
nance manual provided with the machine
documentation.

Danger warning decals

Risk of crushing.
Never insert body parts
between the bead break-
ing shoe, rim and rim
support.
When locking the rim on
the turntable, never in-
sert your hands between
the rim and the clamp
gripper.
NEVER stand behind the
machine.
NEVER insert your hands
between the wheel and
the head when lowering
the head.
44

BEAD BREAKING

WARNING
Noise levels may reach 85 dB(A) during
this procedure. Therefore we advise
operators to wear hearing protection
devices.
Deciding from which side of
the wheel the tyre must be
demounted
Fig. 9
A
B
C
A Narrow side - Side for mounting the
tyre
B Rim well
C Wheel
D Wider side - You cannot mount tyres
from this side
The two sides may be almost identical,
but only the narrow side serves for tyre
mounting and demounting
Identify the side for tyre mounting and make
sure that this side is facing upward when you
install the tyre on the table top (i.e. facing
toward the mount/demount head)

Special instructions

Alloy wheels
Some alloy wheels on the market have
minimal rim wells or are even completely
Operator's manual A 2025 LL
D
9