Ambient Working Conditions - Corghi R.E.M.O. COMPACT Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CAUTION
Make sure that there are no permanent mag-
nets, electromagnets or sources of heat in the
vicinity of the machine as these could cause
irreparable damage (they might irreparably
damage the programme disk and the Personal
Computer).
WARNING
Ensure there are no apertures near the
machine (e.g. windows, doors, skylights, port-
lights, etc.) allowing sunlight to shine directly
onto the cameras, even if only briefly, while
the aligner is in use. If necessary, obscure
these apertures completely or partially.

Ambient working conditions

Relative humidity
Temperature range
Minimum brightness level:
WARNING
The machine must not be operated in potentially
explosive atmosphere.
Operator's manual R.E.M.O. COMPACT
NOMENCLATURE OF COMPONENTS
Electrical controls integrated in robotic
20% - 80%.
0°C - 40°C.
300 lux
Key:
- A: button panel with head movement controls
- B: AUTO/MAN selector
- C: flashing warning lamp and buzzer
- D: emergency button
Make absolutely certain that you carry out
the operations listed below with maximum at-
tention and precision to guarantee maximum
duration of the batteries incorporated in the
robotized units.
Turning the machine on
- Check that the AUT-MAN selector is on AUT
- While the machine's operating systems are
- when the screen page shown in figure 110
ON BOARDS AND ELECTRICAL
INSTRUMENT PANELS
unit
C
A B
TURNING THE MACHINE
ON AND OFF
CAUTION
(automatic working mode).
loading, make sure that in the working area
there are no obstacles that can hinder move-
ment of the robotized units or lift.
appears the aligner is ready to work.
D
59
EN

Publicité

Table des Matières
loading

Table des Matières