Characteristic Angle Symbols For Adjustment Screens; Technical Assistance; Status Bar; Characteristic Angle Symbols For Data Summary Screens - Corghi R.E.M.O. COMPACT Manuel D'utilisation

Degrees or lengths Switches the display
of values between units of length and degrees.
Length unit of measurement Switches
the length unit of measurement between mil-
limetres and inches.
Unit of measurement in degrees
Switches the unit of measurement for angle
values between centesimal and sexagesimal
degrees.
Pressure unit of measurement Switches
the unit of measurement for pressure values
between PSI and BAR.

Technical assistance

Smart Card update Main Smartcard
update procedure.
Smart Card Data Record Smartcard
reading.
Job counter Displays the number of
jobs done.

Status bar

The status bar shows messages of use during
execution of the program, in graphic form.
Insertion mode Using the keys ←
and → the cursor moves within the field and not
between two adjacent fields.
Maximum steering angle enabled.
Non standard thrust angle sign con-
vention.
Save job in progress.
Operator's manual R.E.M.O. COMPACT
Characteristic angle symbols for
adjustment screens
In the adjustment screens, the vehicle's char-
acteristic angles are referred to by means of
graphic symbols.
Total front toe with standard signs.
LH and RH half toes with
standard sign conventions.
LH and RH camber.
Left and right front caster values
Total rear toe with standard sign con-
ventions.
Thrust angle with standard sign con-
ventions.
Front setback.
Rear setback.
Characteristic angle symbols for
data summary screens
In the data summary screens, the vehicle's
characteristic angles are referred to by means
of graphic symbols.
Total front toe
Total rear toe
Front LH half toe
Rear LH half toe
Front RH half toe
Rear RH half toe.
LH front camber
LH rear camber
EN
69