Set-Up - Corghi R.E.M.O. COMPACT Manuel D'utilisation

RH front camber
RH rear camber
LH front caster
Thrust angle
RH front caster
Rear setback
LH front king pin
RH front king pin
Track difference
LH included angle
RH included angle
LH side offset
Front LH steering angle difference.
RH side offset
Front RH steering angle difference
Axle offset
LH front maximum steering angle
Wheel base difference
RH front maximum steering angle
Front setback
70

SET-UP

User set-up
To access the user set-up, select the
icons from the main menu.
From the user set-up, you can customise the
alignment procedure to adapt it to your own
requirements.
Customisation options for the alignment proce-
dure are groups in folders (see example in fig.
44); each folder contains similar customisation
functions.
The different options available are provided for
each setting.
Move within the set-up windows using the keys
↑, ↓, PAGE↑, PAGE↓, ←, → and RETURN to
confirm the option selected. The ESC key aborts
the selection just made.
The option currently saved is highlighted in blue.
The option that is not active (because the aligner
version does not allow its use, or other selections
prevent it from being used) is transparent.
Exit the set-up function by selecting the
icon and save the options set by selecting the
icon in the information window.
Selecting this
setup by calling up predefined configurations.
Operator's manual R.E.M.O. COMPACT
icon quickly changes the
44
and