Télécharger Imprimer la page

CAMPAGNOLA MASTER Manuel D'utilisation Et D'entretien page 93

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 98
7.1.5 HEAD AND HANDLE CLEANING
This paragraph contains the information and instructions to be observed when cleaning the harvesting head and
handle.
Periodically check the integrity of the fixed guards and their fixings, paying particular attention to the access
guards to the product mechanics.
Keep the head and handles clean using a cloth or brush.
Do not spray or immerse in water.
Do not use cleaning agents that could permanently damage them.
Pay particular attention to the cleanliness of the slits on the power unit, which have the function of circulating air
inside the head for motor cooling.
CAUTION!
Cleaning the head reduces the formation of friction that would jeopardise performance and autonomy of
the tool.
7.1.6
END OF WORK MAINTENANCE
After use, or in the case of long periods of inactivity, it is prescribed to:
Follow the procedure for switching off and securing the product as described in paragraph 6.5.
7.2 SPECIALIST OR EXTRAORDINARY MAINTENANCE
Extraordinary maintenance operations must be carried out by a mechanical or electrical
maintenance technician depending on the activity to be performed.
CAUTION
Prior to any extraordinary maintenance activity, it is mandatory to secure the product, specifically:
Put on puncture/cut-proof protective gloves.
Switch the tool off with the ON/OFF switch (3) at the OFF position.
Disconnect the power cable (18) or battery (24) from the tool.
Place the battery in a safe, dry and weatherproof location.
CAUTION
Any extraordinary maintenance work must be carried out at a T.A.C.
7.3 MAINTENANCE PLAN
The maintenance activities of the product have been organised as indicated in this manual.
They originate partly from the maintenance activities to which the product is traditionally subjected, and partly
from the experience of CAMPAGNOLA S.r.l.'s service centres.
This makes it possible to include product-specific differences in a single document.
NOTE
Preventive and specialised maintenance operations (routine and extraordinary) can be carried out,
according to the instructions in the manual, by the user Customer or by CAMPAGNOLA S.r.l.'s Authorised
Assistance Centres.
CAUTION
The maintenance operations described below are to be carried out with the product stationary and power
switched off.
0310.0419_01
93

Publicité

loading

Ce manuel est également adapté pour:

Master plug-in